Home › Fault codes › U176A00

U176A00 — Location based chassis; chassis platform communication error

Location based chassis; chassis platform communication error. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U176A00

Porsche Taycan

OTA Function Control Unit

How to read and clear U176A00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U176A00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the OTA Function Control Unit

U13E300CONCLUSION Identification, implausible
U140000Function restriction – supply voltage too low
U140100Function restriction – supply voltage too high
U160300Connect data bus; defective
U176800Vehicle data; remote data access error
U176900Location-based chassis – function restriction due to GPS failure

All 40 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.