Home › Fault codes › U158D00
U158D00 — Driver assistance systems control module, Missing message
Driver assistance systems control module, Missing message. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U158D00
How to read and clear U158D00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U158D00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| U146B00 | Control module for right front object detection radar sensor, implausible signal |
| U146C00 | Roof antenna control units, implausible signal |
| U146D00 | Electromechanical brake booster, implausible signal |
| U150400 | CAN bus front light (AFS) – no communication |
| U150500 | Data bus front light, Faulty |
| U152600 | Central digital matrix light control module, no communication |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.