Home › Fault codes › U10F100
U10F100 — Control unit for active engine mounts - no communication
Control unit for active engine mounts - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U10F100
How to read and clear U10F100
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U10F100 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| U10AB00 | Infotainment CAN bus - no communication |
| U10B500 | Microphone control module, No communication |
| U10B600 | Head-up display control module, No communication |
| U10DB00 | LIN bus 3 - electrical fault |
| U10DF00 | Structure-borne sound actuator, No communication |
| U10E000 | Control unit for assistance systems – missing message |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110400 | Expanded bus operation active |
| U110500 | Transport mode active |
| U110600 | Customer service mode active |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.