Home › Fault codes › U107000
U107000 — Front camera control unit - no communication
Front camera control unit - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U107000
How to read and clear U107000
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U107000 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| U105100 | LIN bus, battery sensor - implausible signal |
| U105200 | LIN bus, generator - no communication |
| U105300 | LIN bus, generator - implausible signal |
| U105400 | Central computer control unit - missing message |
| U105500 | Central computer control unit – signal implausible |
| U105600 | Rear Seat Entertainment - no communication |
| U107100 | Distance measuring sensor (slave - left) - no communication |
| U107200 | Rear A/C control module, No communication |
| U107300 | Rear seat control module, driver side, No communication |
| U107400 | Rear seat control module, Passenger side, No communication |
| U107600 | LIN bus 2 - electrical fault |
| U107900 | Image processing control module, No communication |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.