Home › Fault codes › U104C00
U104C00 — Camera system control unit - no communication
Camera system control unit - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U104C00
How to read and clear U104C00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U104C00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| U103100 | FlexRay data bus, No synchronization |
| U103200 | FlexRay data bus, Initialization failed |
| U103E00 | Brake booster control unit - no communication |
| U104500 | Lane Change Assist control unit (master) - no communication |
| U104600 | Lane change assistance control module, Implausible signal |
| U104700 | Rear lid control unit - no communication |
| U104E00 | ParkAssist control unit - no communication |
| U105000 | LIN bus, battery sensor - no communication |
| U105100 | LIN bus, battery sensor - implausible signal |
| U105200 | LIN bus, generator - no communication |
| U105300 | LIN bus, generator - implausible signal |
| U105400 | Central computer control unit - missing message |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.