Home › Fault codes › U028A00

U028A00 — Transmission oil pump – electrical fault

Transmission oil pump – electrical fault. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U028A00

Porsche Taycan

How to read and clear U028A00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U028A00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Engine Control Module 1

U019B00High-voltage charger (OBC) control unit – missing message
U01B400Brake booster control unit - no communication
U01BA00Solenoid (parking lock) – electrical fault
U021200Steering wheel electronics control unit – missing messages
U023500Distance measuring sensor (master - right) - no communication
U025900Special vehicles control unit - no communication
U029200Front-axle high-voltage power electronics control unit - no communication
U029900Control unit for high-voltage voltage converter (booster) - missing message
U029B00High-voltage power electronics 3 control unit - missing message
U030100Motor electronics (DME) software control unit faulty
U030400Selector support, software incompatible
U040200Transmission control unit, signal implausible

All 274 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.