Home › Fault codes › P326C00
P326C00 — Terminal 30 – defective
Terminal 30 – defective. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P326C00
How to read and clear P326C00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P326C00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the DC/DC Converter
| P1FF700 | Internal voltage sensor 2 – signal implausible |
| P1FF800 | Control unit – function restriction |
| P1FF900 | Control unit – function restriction |
| P1FFC00 | Control unit – function restriction |
| P1FFD00 | Control unit – function restriction |
| P1FFE00 | Internal voltage sensor 1 – signal implausible |
| P32A100 | Control unit – Function limitation |
| P32A800 | HV voltage converter - function limitation due to undervoltage (12 V) |
| P32AD00 | HV voltage converter - function limitation due to undervoltage (12 V) |
| P32B200 | High-voltage voltage converter, voltage sensor, below minimum |
| P32B300 | Control unit – Function limitation |
| U002800 | Hybrid CAN bus – faulty |
All 200 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.