Home › Fault codes › P1DA500
P1DA500 — Data bus – fault value received
Data bus – fault value received. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P1DA500
How to read and clear P1DA500
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P1DA500 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| P168400 | Control module programming, Malfunction in data transfer |
| P16F600 | 48V vehicle electrical system, Electrical malfunction |
| P16F700 | Starter generator, Sequence error during operating mode setting |
| P1B0000 | Generator, Mechanical malfunction |
| P1B0100 | Generator, Electrical error |
| P1B0200 | 12 V battery monitoring - no function |
| P33D700 | High-voltage power electronics phase control - internal fault |
| U001000 | Comfort CAN bus – defective |
| U001100 | Comfort CAN bus - no communication |
| U001800 | Comfort CAN bus, single-wire operation |
| U002800 | Hybrid CAN bus – faulty |
| U002900 | Hybrid CAN bus - no communication |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.