Home › Fault codes › P167E00
P167E00 — Start Stop restart, start time exceeded
Start Stop restart, start time exceeded. The 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P167E00
How to read and clear P167E00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P167E00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Engine Control Module 1
| P15A900 | Transmission oil pump – speed deviation |
| P160900 | Crash switch-off was triggered |
| P160A00 | Function restriction |
| P161200 | Coding |
| P162400 | Engine control indicator light switched on |
| P164700 | Engine electronics (DME) control unit – coding defective |
| P168A00 | Reversible crash shut-off was triggered |
| P169A00 | Transport mode active |
| P191B00 | Right radiator fan (RF1) – signal implausible |
| P191C00 | Left radiator fan (RF3) – signal implausible |
| P198700 | Function restriction due to brake temperature |
| P1A8300 | Camshaft adjustment, Replacement reaction active |
All 221 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.