Home › Fault codes › P085700
P085700 — Traction Control Input Signal Range/Performance
Traction Control Input Signal Range/Performance. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P085700
How to read and clear P085700
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P085700 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| P060700 | Ctrl. module faulty |
| P060B00 | Control unit – internal error |
| P061000 | Control unit - variant coding invalid |
| P062F00 | Function restriction |
| P063400 | Control unit - temperature switch-off |
| P064F00 | Coding |
| P185000 | Data bus – missing message from convertible top control unit |
| P258C00 | Activation of vacuum pump for brake - short circuit to ground |
| P258D00 | Activation of vacuum pump for brake - short circuit to B+ |
| U008000 | FlexRay data bus - synchronization |
| U008100 | Vehicle Communication Bus F Performance |
| U008A00 | Vehicle Communication Bus G Performance |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.