Home › Fault codes › C1417F7

C1417F7 — Control unit for motor pump unit, overtemperature or over/undervoltage

Control unit for motor pump unit, overtemperature or over/undervoltage. The Taycan and Panamera (972) report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set C1417F7

Porsche Taycan

Roll Control System

Porsche Panamera (972, 2024–)

eAWS1 (elektrische Aktive Wank Stabilisierung 1)

How to read and clear C1417F7

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1417F7 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Roll Control System

C1417F1Motor pump unit control unit, high-voltage setpoint current outside the valid value range
C1417F2Control unit for motor pump unit, received VIN implausible
C1417F3Control unit for motor pump unit, software control unit fault
C1417F4Motor pump unit control unit, low-voltage setpoint voltage outside the valid value range
C1417F5Motor pump unit control unit, high-voltage setpoint voltage outside the valid value range
C1417F6Control unit for motor pump unit, commissioning not carried out
C1419F0Hydraulic motor pump unit, pressure sensors on the left, pressure out of the valid value range
C1419F1Hydraulic motor pump unit, left pressure validation error
C1419F2Hydraulic motor pump unit, overtemperature pressure sensors on left
C1419F3Hydraulic motor pump unit, pressure sensors on the right, pressure out of the valid value range
C1419F4Hydraulic motor pump unit, right pressure validation error
C1419F5Hydraulic motor pump unit, overtemperature pressure sensors on right

All 81 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.