Home › Fault codes › C13CAF0
C13CAF0 — Headlight projection module – coding
Headlight projection module – coding. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C13CAF0
How to read and clear C13CAF0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C13CAF0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Light Control Left
| C134101 | Fan 3 - electrical fault |
| C134201 | Fan 4 - electrical fault |
| C134301 | Fan 1 and 2 - electrical fault |
| C134401 | 5 V supply voltage – electrical fault |
| C136801 | Fog light – electrical fault |
| C13CA92 | Headlight projection module – electrical fault |
| C13CAF1 | Headlight projection module – signal implausible |
| C13CAF2 | Headlight projection module, low beam – electrical fault |
| C13CAF3 | Headlight projection module, high beam – electrical fault |
| U101100 | Supply voltage – too low |
| U101200 | Supply voltage – too high |
| U103000 | LIN bus 1 – electrical fault |
All 223 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.