Home › Fault codes › C1331F3
C1331F3 — Digital matrix light, Ethernet connection cannot be established
Digital matrix light, Ethernet connection cannot be established. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C1331F3
How to read and clear C1331F3
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1331F3 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| C12FAF2 | Driver assistance systems front camera, System limits exceeded |
| C12FAF3 | Driver assistance systems front camera, Initialization error |
| C12FBF0 | Standstill detection, unexpected values from distance control |
| C1331F0 | Digital matrix light, Active fog mode |
| C1331F1 | HD-Matrix Licht rechts, nicht angelernt |
| C1331F2 | HD-Matrix Licht links, nicht angelernt |
| C1331F4 | Digital matrix light, Cannot send via Ethernet |
| C1331F5 | Digital matrix light, H.264 coding not possible |
| C1338F0 | Innodrive, currently not available |
| C1338F1 | Innodrive, not available |
| C135AF0 | zFAS platform, Internal malfunction |
| U008100 | Vehicle Communication Bus F Performance |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.