Home › Fault codes › C130B29
C130B29 — Rear left body acceleration sensor, implausible signal
Rear left body acceleration sensor, implausible signal. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C130B29
How to read and clear C130B29
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C130B29 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| C1251FD | PDCC system restriction |
| C1251FE | PDCC system restriction |
| C12964B | Sway Stabilization Control Module, excessive temperature |
| C12EF00 | New installation detected |
| C130B01 | Rear left body acceleration sensor, electrical fault |
| C130B04 | Rear left body acceleration sensor faulty |
| C130B31 | Rear left body acceleration sensor, no signal |
| C130B4A | Rear left wheel acceleration sensor, suspected faulty installation |
| C130C01 | Rear right body acceleration sensor, electrical fault |
| C130C04 | Rear right body acceleration sensor faulty |
| C130C29 | Rear right body acceleration sensor, implausible signal |
| C130C31 | Rear right body acceleration sensor, no signal |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.