Home › Fault codes › C12BC1D
C12BC1D — Magnet brake, Current implausible
Magnet brake, Current implausible. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C12BC1D
How to read and clear C12BC1D
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C12BC1D shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Lock Electronics
| C12BBF0 | Actuator motor, Initialization failed |
| C12BBF1 | Actuator motor, Position implausible |
| C12BC07 | Magnet brake, mechanical malfunction |
| C12BC11 | Magnetic brake - short circuit to ground |
| C12BC12 | Magnetic brake - short circuit to B+ |
| C12BC13 | Magnet brake, Open circuit |
| C13AE1D | Transverse lock, servo motor - implausible current |
| C13AEF4 | Transverse lock, servo motor, temperature change implausible |
| C13AFF5 | Rear-differential lock, position sensor, ground line, open circuit |
| C13AFF6 | Transverse lock, position sensor, power supply, open circuit |
| C13AFF7 | Transverse lock, position sensor, signal line, short circuit to signal line |
| C13AFF8 | Transverse lock, position sensor, power supply - short circuit to ground |
All 67 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.