Home › Fault codes › C129BF0
C129BF0 — Electric drive 3, Sequence error during operating mode setting
Electric drive 3, Sequence error during operating mode setting. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C129BF0
How to read and clear C129BF0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C129BF0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| C124EF0 | 48V-System, Locking after crash active |
| C124FF0 | High-voltage battery control unit - procedural error while setting operating mode |
| C1250F0 | Electric compressor, Sequence error during operating mode setting |
| C1251F0 | Roll stabilization, Sequence error during operating mode setting |
| C128EF0 | Control module for contactless charge, Sequence error during operating mode setting |
| C129AF0 | High-voltage power electronics (front axle) - procedural error while setting operating mode |
| C12A1F0 | Front-axle roll stabilization system - procedural error while setting operating mode |
| C12A2F0 | Roll stabilization 2, Sequence error during operating mode setting |
| C12A5F0 | Vehicle electrical system configuration, implausible |
| C1313F0 | HV battery charging unit 2, Sequence error during operating mode setting |
| C136BF0 | High-voltage coordinator - function restriction due to high-voltage voltage converter |
| P056000 | Terminal 30 power supply – signal implausible |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.