Home › Fault codes › C128313
C128313 — Auxiliary headlight – open circuit
Auxiliary headlight – open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C128313
How to read and clear C128313
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C128313 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Light Control Left
| C125301 | LED-activation interface, Electrical error |
| C127504 | Module for external sensors, faulty |
| C127517 | Module for external sensors, voltage too high |
| C128301 | Auxiliary headlight – electrical fault |
| C128304 | Laser beam, faulty |
| C128311 | Laser beam, Short circuit to Ground (GND) |
| C1283F0 | Auxiliary headlight, coding resistance – electrical fault |
| C1283F1 | Auxiliary headlight, temperature sensor – electrical fault |
| C1283F2 | Auxiliary headlight – switch-off due to overtemperature |
| C1283F3 | Auxiliary headlight – voltage too high |
| C1283F4 | Auxiliary headlight – voltage too low |
| C1283F8 | Laser beam, Safety shutdown |
All 223 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.