Home › Fault codes › C11E654

C11E654 — 12 Volt-Energy management, No basic setting

12 Volt-Energy management, No basic setting. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set C11E654

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear C11E654

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and C11E654 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Gateway

C11C5F2High-voltage system, Wiring circuit 2 open
C11C5F3High-voltage system, Wiring circuit 3 open
C11C5F4High-voltage system, Wiring circuit 4 open
C11C5F5High-voltage system, Wiring circuit 5 open
C11CB0112 V electrical system, Electrical error
C11CBF012 volt vehicle electrical system, Lowering not possible
C11E6F012 Volt-Energy management, incorrect basic setting
C1220F0High-voltage battery, discharging protection
C124EF048V-System, Locking after crash active
C124FF0High-voltage battery control unit - procedural error while setting operating mode
C1250F0Electric compressor, Sequence error during operating mode setting
C1251F0Roll stabilization, Sequence error during operating mode setting

All 374 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.