Home › Fault codes › C1199FB
C1199FB — High beam – switch-off due to undertemperature
High beam – switch-off due to undertemperature. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C1199FB
How to read and clear C1199FB
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1199FB shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Light Control Left
| C1199F1 | High beam headlight, temperature sensor - electrical fault |
| C1199F2 | High beam headlight - voltage too high |
| C1199F3 | High beam headlight - voltage too low |
| C1199F6 | High beam headlight, function restriction due to overtemperature |
| C1199F7 | High beam, excessive temp. |
| C1199FA | High beam – short circuit |
| C1199FC | High beam – switch-off due to undertemperature |
| C1199FD | High beam, excessive temp. |
| C119A01 | Static AFS light, Electrical error |
| C119A13 | Stationary cornering light, Open circuit |
| C119A98 | Static AFS light, Temperature too high |
| C119AF0 | Static cornering light, coding resistance - electrical fault |
All 223 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.