Home › Fault codes › C1188F1
C1188F1 — Brake booster – overheating stage 1 active
Brake booster – overheating stage 1 active. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C1188F1
How to read and clear C1188F1
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1188F1 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Booster
| C118796 | Brake booster, internal fault |
| C1187F7 | Brake booster – current too high |
| C1187F8 | Brake booster, brake pedal, block detected |
| C1187F9 | Brake booster, distance sensor, implausible value |
| C1187FA | Brake booster, incompatible hardware detected |
| C118816 | Brake booster – voltage too low |
| C1188F2 | Brake booster – overheating stage 2 active |
| C120200 | Brake booster – overtemperature |
| C1259F0 | Brake booster control unit – undergoing diagnostics |
| C13EFF1 | Brake booster, distance sensor, implausible value |
| P056200 | Supply voltage - voltage too low |
| P056300 | Supply voltage too high |
All 55 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.