Home › Fault codes › C113AF0
C113AF0 — Voltage converter, Sequence error during operating mode setting
Voltage converter, Sequence error during operating mode setting. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C113AF0
How to read and clear C113AF0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C113AF0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| B2F0400 | Development code 4 |
| B2F0500 | Development code 5 |
| B2F0600 | Development code 6 |
| B2F0700 | Development code 7 |
| B2F0800 | Development code 8 |
| C10DDF3 | Data Bus OBD Interface, Internal processor monitoring |
| C115D00 | Play protection active |
| C11B7F0 | High-voltage power electronics - procedural error while setting operating mode |
| C11B8F0 | High-voltage battery charger, Sequence error during operating mode setting |
| C11B9F0 | Control module for thermal management, Sequence error during operating mode setting |
| C11BAF0 | High-voltage battery control unit - procedural error while setting operating mode |
| C11C5F0 | High-voltage syst., Locking after crash active |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.