Home › Fault codes › C10F131
C10F131 — Steering torque sensor 2 – no signal
Steering torque sensor 2 – no signal. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C10F131
How to read and clear C10F131
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C10F131 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Steering Assist
| C10CB00 | Limp home not possible |
| C10D700 | Comfort limitation |
| C10EE00 | Rolling test mode - fault |
| C10F029 | Steering torque sensor 1 - implausible signal |
| C10F031 | Steering torque sensor 1 – no signal |
| C10F129 | Steering torque sensor 2 - implausible signal |
| C10F2F0 | Control limit, exceeded |
| C113E00 | Software error detected |
| C115C54 | Active steering control module, No basic setting |
| C11DF29 | Rack position implausible |
| C11EEF1 | Time delay function, unexpected values from ctrl. module for distance control |
| C12ABF1 | Rear radar, left – faulty |
All 133 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.