Home › Fault codes › C103217
C103217 — Supply voltage sensor for vehicle leveling system, left - above setpoint value
Supply voltage sensor for vehicle leveling system, left - above setpoint value. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C103217
How to read and clear C103217
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C103217 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| C103114 | Vehicle level sensor - short circuit to B+ |
| C103129 | Vehicle level sensor - implausible signal |
| C1031F3 | Vehicle level sensor, front right residual pressure for lowering too low |
| C1031F4 | Vehicle level sensor, rear left residual pressure for lowering too low |
| C1031F5 | Vehicle level sensor, rear right residual pressure for lowering too low |
| C103216 | Supply voltage sensor for vehicle leveling system, left - below setpoint value |
| C103316 | Supply voltage sensor for vehicle leveling system, right - below setpoint value |
| C103317 | Supply voltage sensor for vehicle leveling system, right - above setpoint value |
| C103407 | Vehicle level sensor, front left - mechanical fault |
| C103411 | Vehicle level sensor, front left – short circuit to ground |
| C103415 | Vehicle level sensor, front left – short circuit to B+ or open circuit |
| C103429 | Vehicle level sensor, front left – signal implausible |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.