Home › Fault codes › C102F11
C102F11 — Leveling system pump temperature sensor - short circuit to ground
Leveling system pump temperature sensor - short circuit to ground. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C102F11
How to read and clear C102F11
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C102F11 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| B2F0100 | Development code 1 |
| C052900 | Steering-angle sensor – no basic setting |
| C101F00 | Diagnostic function active |
| C102129 | Combination sensor yaw rate - signal implausible |
| C102329 | Lateral acceleration combination sensor - signal implausible |
| C102E00 | Switch-off due to excessive temperature |
| C102F15 | Leveling system pump temperature sensor - short circuit to B+ |
| C103016 | Pressure sensor supply voltage - below limit |
| C103017 | Pressure sensor supply voltage - above limit |
| C103112 | Vehicle level sensor - short circuit to B+ |
| C103114 | Vehicle level sensor - short circuit to B+ |
| C103129 | Vehicle level sensor - implausible signal |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.