Home › Fault codes › C056D00
C056D00 — Voltage supply for brake-pedal travel sender - short circuit to ground
Voltage supply for brake-pedal travel sender - short circuit to ground. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C056D00
How to read and clear C056D00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C056D00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Booster
| B184C00 | Release active |
| B200100 | Control unit – wrong software version |
| B2F0100 | Development code 1 |
| C002100 | Brake booster – no power output |
| C004800 | Brake booster – distance sensor defective |
| C055E00 | Primary Brake Circuit Hydraulic Leak |
| C057900 | Brake booster temperature sensor 2 - short circuit to ground |
| C057A00 | Brake booster temperature sensor 2 - short circuit to B+ |
| C058800 | Motor position sensor for brake booster - short circuit to ground |
| C058900 | Motor position sensor for brake booster - short circuit to B+ |
| C058A00 | Motor position sensor for brake booster - implausible signal |
| C114113 | Terminal 30, Open circuit |
All 55 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.