Home › Fault codes › C004600
C004600 — Brake pressure sensor 1/2
Brake pressure sensor 1/2. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C004600
How to read and clear C004600
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C004600 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| B200FF7 | Internal malfunction |
| B200FF8 | Internal malfunction |
| B202500 | Coding |
| B202700 | Coding |
| B2F0100 | Development code 1 |
| C002000 | ABS Pump Motor Control |
| C006B00 | Stability System Active Too Long |
| C006C00 | Stability System |
| C050000 | Front left wheel speed sensor - open circuit |
| C050100 | Front left speed sensor - implausible signal |
| C050200 | Front left speed sensor - short circuit to ground |
| C050300 | Front left speed sensor - short circuit to B+ |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.