Home › Fault codes › B2F1B00
B2F1B00 — Development code 27
Development code 27. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B2F1B00
How to read and clear B2F1B00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B2F1B00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| B2F1500 | Development code 23 |
| B2F1600 | Development code 22 |
| B2F1700 | Development code 23 |
| B2F1800 | Development code 24 |
| B2F1900 | Development code 25 |
| B2F1A00 | Development code 26 |
| B2F1C00 | Development code 28 |
| B2F1D00 | Development code 29 |
| B2F1E00 | Data bus - missing message |
| B2F1F00 | Development code 31 |
| C1000F0 | Control module for distance control, BlockID not plausible |
| C10A700 | Rolling test mode active |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.