Home › Fault codes › B201D00

B201D00 — Function restriction, From incorrect signature

Function restriction, From incorrect signature. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B201D00

Porsche Taycan

Door Module, DriverDoor Module, PassengerDoor Module, Rear DriverDoor Module, Rear Passenger

Porsche 911 (992)

Tuer_FS (Tuere vorne Fahrerseite)Tuer_BFS (Tuere vorne Beifahrerseite)

Porsche Panamera (971, 2017–2023)

Door Module, DriverDoor Module, PassengerDoor Module, Rear DriverDoor Module, Rear Passenger

Porsche Panamera (972, 2024–)

Tuer_FS (Tuere vorne Fahrerseite)Tuer_BFS (Tuere vorne Beifahrerseite)Tuer_FSh (Tuere hinten Fahrerseite)Tuer_BFSh (Tuere hinten Beifahrerseite)

Porsche Cayenne (9YA)

Door Module, DriverDoor Module, PassengerDoor Module, Rear DriverDoor Module, Rear Passenger

How to read and clear B201D00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B201D00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Door Module, Driver

B1AB511Lighting in front door, pin D16 - short circuit to ground
B1AB513Lighting in front door, pin D16 - open circuit
B1B9600Undervoltage due to short drop strategy - active
B200042Control unit – function restriction
B200500Coding
B201200Coding
C111829Lane change assistance button, Implausible signal
U101100Supply voltage – too low
U101200Supply voltage – too high
U101300Coding
U10BA00LIN bus 1 – no communication
U110300Production mode active

All 107 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.