Home › Fault codes › B201600
B201600 — Control unit, disposal not ended
Control unit, disposal not ended. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B201600
How to read and clear B201600
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B201600 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Airbag
| B199929 | Rear high-voltage system crash sensor - signal implausible |
| B19994A | Rear high-voltage system crash sensor - part number implausible |
| B200000 | Control unit – function restriction |
| B200042 | Control unit – function restriction |
| B200500 | Coding |
| B201200 | Coding |
| B201F00 | Coding |
| B2F0100 | Development code 1 |
| B2F0200 | Development code 2 |
| B2F0300 | Development code 3 |
| B2F0400 | Development code 4 |
| B2F0A00 | Development code 10 |
All 723 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.