Home › Fault codes › B200200

B200200 — Data records in control module changed

Data records in control module changed. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B200200

Porsche Taycan

Steering Assist

Porsche 911 (992)

Steering Assist

Porsche Panamera (971, 2017–2023)

Steering Assist

Porsche Panamera (972, 2024–)

Steering Assist

Porsche Cayenne (9YA)

Steering Assist

How to read and clear B200200

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B200200 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Steering Assist

B200046Control unit – function restriction
B200047Control unit – function restriction
B200049Control unit – function restriction
B200087Control module, Software incompatible
B200096Control unit – function restriction
B2000F0Control unit – function restriction
B200500Coding
B200FF0Control unit – function restriction
B200FF1Control unit – function restriction
B200FF2Internal malfunction
B200FF3Internal malfunction
B200FF4Internal malfunction

All 133 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.