Home › Fault codes › B1C4419
B1C4419 — Compressor, front spoiler – current too high
Compressor, front spoiler – current too high. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B1C4419
How to read and clear B1C4419
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B1C4419 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B1C3912 | Position sensor for right convertible-top compartment lid open – short circuit to B+ |
| B1C3914 | Position sensor for right convertible top compartment lid opened – short circuit to ground or open circuit |
| B1C3929 | Position sensor for right convertible-top compartment lid open – implausible signal |
| B1C4411 | Compressor, front spoiler – short circuit to ground |
| B1C4412 | Compressor, front spoiler – short circuit to B+ |
| B1C4413 | Compressor, front spoiler – open circuit |
| B1C4454 | Front spoiler, not trained |
| B1C44F0 | Front-spoiler compressor – defective |
| B1C44F1 | Compressor, front spoiler, thermal protection active |
| B1C4612 | Position sensor for right convertible-top compartment lid in service position – short circuit to B+ |
| B1C4614 | Convertible top compartment lid position sensor, right service position – short circuit to ground or open circuit |
| B1C4629 | Position sensor, convertible-top compartment lid service position, right – position implausible |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.