Home › Fault codes › B198602

B198602 — Tailgate proximity sensor – signal error

Tailgate proximity sensor – signal error. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B198602

Porsche Taycan

Comfort System Module

Porsche 911 (992)

BCM2 (Body Control Module 2)

Porsche Panamera (971, 2017–2023)

BCM2 (Body Control Module 2)

Porsche Panamera (972, 2024–)

BCM2 (Body Control Module 2)

Porsche Cayenne (9YA)

BCM2 (Body Control Module 2)

How to read and clear B198602

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B198602 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Comfort System Module

B198502Proximity sensor in front lid – signal error
B198511Front lid proximity sensor – short circuit to ground
B198512Front lid proximity sensor – short circuit to B+
B198513Front lid proximity sensor – open circuit
B198529Front lid proximity sensor – signal implausible
B1985F0Front lid proximity sensor – anti-play prevention active
B198611Tailgate proximity sensor – short circuit to ground
B198612Tailgate proximity sensor – short circuit to B+
B198613Tailgate proximity sensor – open circuit
B198629Tailgate proximity sensor – signal implausible
B1986F0Tailgate proximity sensor – play protection active
B199311Lighting for rear lid emergency release button – short circuit to ground

All 616 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.