Home › Fault codes › B198313

B198313 — Center rear fog light bulb, Open circuit

Center rear fog light bulb, Open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B198313

Porsche Taycan

Comfort System Module

Porsche 911 (992)

BCM2 (Body Control Module 2)

Porsche Panamera (971, 2017–2023)

BCM2 (Body Control Module 2)

Porsche Panamera (972, 2024–)

BCM2 (Body Control Module 2)

Porsche Cayenne (9YA)

BCM2 (Body Control Module 2)

How to read and clear B198313

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B198313 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Comfort System Module

B193192Front lid lock motor – mechanical fault
B193213Rear lid emergency release button – open circuit
B193229Rear lid emergency release button – signal implausible
B193329Button for unlocking front lid – signal implausible
B198311Center rear fog light bulb, Short circuit to ground
B198312Center rear fog light bulb, Short circuit to B+
B198315Center rear fog light bulb, Open circuit/short circuit to B+
B198411Center back-up light bulb, Short circuit to ground
B198412Center back-up light bulb, Short circuit to B+
B198413Center back-up light bulb, Open circuit
B198415Center back-up light bulb, Open circuit/short circuit to B+
B198502Proximity sensor in front lid – signal error

All 616 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.