Home › Fault codes › B18A4F3
B18A4F3 — Rear spoiler drive 2 - timeout while extending
Rear spoiler drive 2 - timeout while extending. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B18A4F3
How to read and clear B18A4F3
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B18A4F3 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B184C00 | Release active |
| B18A404 | Rear spoiler drive 2 faulty |
| B18A454 | Rear spoiler, drive 2 - calibration |
| B18A4F0 | Rear spoiler, drive 2 - blockages while extending |
| B18A4F1 | Rear spoiler, drive 2 - blockages while retracting |
| B18A4F2 | Rear spoiler drive 2 - position implausible |
| B18A4F4 | Rear spoiler drive 2 - timeout while retracting |
| B18A4F5 | Rear spoiler, drive 2, warning message in instrument cluster requested |
| B18A4F6 | Rear spoiler, drive 2 - extension stop activated |
| B18A4F9 | Rear spoiler, drive 2 - retraction stop activated by PSM |
| B18A4FA | Rear spoiler, drive 2, extension requested by PSM |
| B18A504 | Speed sensor, rear spoiler drive 1, defective |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.