Home › Fault codes › B180EF0

B180EF0 — ParkAssist sensors on right – icy/dirty

ParkAssist sensors on right – icy/dirty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B180EF0

Porsche Taycan

Central ElectricsFront Assist Camera

Porsche 911 (992)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

Porsche Panamera (971, 2017–2023)

BCM1 (Body Control Module 1)

Porsche Panamera (972, 2024–)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

Porsche Cayenne (9YA)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

How to read and clear B180EF0

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B180EF0 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Central Electrics

B17F129Engine noise selection button, Implausible signal
B17F311Rear window shade button 2, Short circuit to Ground (GND)
B17F329Rear window shade button 2, Implausible signal
B17F7F0Front seat heating – function restriction due to overtemperature
B17F7F1Front seat heating – shutdown due to overtemperature
B180DF0ParkAssist sensors on left – icy/dirty
B180F00Headlight – mechanism incorrectly adjusted
B182211Directional stabilization assistance button, Short circuit to ground
B182229Directional stabilization assistance button, Implausible signal
B182311Button for side view camera, Short circuit to ground
B182329Button for side view camera, Implausible signal
B1836F0Park Assist – internal fault

All 1472 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.