Home › Fault codes › B16E929
B16E929 — Virtual radio key – signal implausible
Virtual radio key – signal implausible. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B16E929
How to read and clear B16E929
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B16E929 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Comfort System Module
| B16E504 | Control module for close-range communication in the driver door, faulty |
| B16E5F0 | Control module for close-range communication in the driver door, Antenna defect |
| B16E604 | Control module for close-range communication in the center console, faulty |
| B16E6F0 | Control module for close-range communication in the center console, Antenna defect |
| B16E704 | Control module for close range communication in the rear lid, faulty |
| B16E7F0 | Control module for close range communication in the rear lid, Antenna defect |
| B175F16 | Antenna 1 for near-field communication, Voltage too low |
| B175F17 | Antenna 1 for near-field communication, voltage too high |
| B175F98 | Antenna 1 for near-field communication, Temperature too high |
| B176A16 | Antenna 2 for near-field communication, Voltage too low |
| B176A17 | Antenna 2 for near-field communication, voltage too high |
| B176A98 | Antenna 2 for near-field communication, Temperature too high |
All 616 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.