Home › Fault codes › B16D412

B16D412 — Outer left tail light – short circuit to B+

Outer left tail light – short circuit to B+. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B16D412

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear B16D412

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B16D412 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Comfort System Module

B16C411Right tail lamp, Short circuit to Ground (GND)
B16C412Right tail lamp, Short circuit to B+
B16C413Right tail lamp, Open circuit
B16C415Right tail lamp, Open circuit/short circuit to B+
B16D404Outer left tail light – defective
B16D411Outer left tail light – short circuit to ground
B16D413Outer left tail light – open circuit
B16D415Outer left tail light – short circuit to B+ or open circuit
B16D416Outer left tail light, voltage too low
B16D417Outer left tail light, voltage too high
B16D429Outer left tail light, signal implausible
B16D431Outer left tail light – no communication

All 616 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.