Home › Fault codes › B157F29

B157F29 — Central locking button on rear right outer door handle – signal implausible

Central locking button on rear right outer door handle – signal implausible. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B157F29

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear B157F29

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B157F29 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Comfort System Module

B151513Position sensor for rear wiper motor – open circuit
B151529Position sensor for rear wiper motor – signal implausible
B154529Button for locking tailgate – signal implausible
B157C29Central locking button on front left outer door handle – signal implausible
B157D29Central locking button on front right outer door handle – signal implausible
B157E29Central locking button on rear left outer door handle – signal implausible
B158A29Central locking button on front left outer door handle – signal implausible
B158B29Central locking button on front right outer door handle – signal implausible
B158C29Central locking button on rear left outer door handle – signal implausible
B158D29Central locking button on rear right outer door handle – signal implausible
B15F811Antenna for central locking system – short circuit to ground
B15F813Antenna for central locking system – open circuit

All 616 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.