Home › Fault codes › B1470F7
B1470F7 — Timeout during reference operation
Timeout during reference operation. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B1470F7
How to read and clear B1470F7
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B1470F7 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B147016 | Supply voltage – too low |
| B147017 | Supply voltage – too high |
| B147054 | Calibration |
| B1470F3 | Temperature - above limit value |
| B1470F4 | Temperature - below limit value |
| B1470F6 | Rear spoiler, timeout during teach-in |
| B1470F8 | Coding |
| B1470F9 | Rear spoiler, test drive faulty |
| B166312 | Microswitch, roof latch locked – short circuit to B+ |
| B166329 | Microswitch, roof latch locked – implausible signal |
| B16F804 | Rear spoiler drive 1 faulty |
| B16F854 | Rear spoiler, drive 1 - calibration |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.