Home › Fault codes › B127FF2

B127FF2 — Right environmental camera, optical malfunction

Right environmental camera, optical malfunction. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B127FF2

Porsche Taycan

Front Assist Camera

Porsche 911 (992)

ZFAS (Zentrales Fahrer Assistenz System)

Porsche Panamera (972, 2024–)

ZFAS (Zentrales Fahrer Assistenz System)

Porsche Cayenne (9YA)

ZFAS (Zentrales Fahrer Assistenz System)

How to read and clear B127FF2

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B127FF2 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Front Assist Camera

B127EF0Side camera (left), calibration
B127EF2Left environmental camera, optical malfunction
B127F04Side camera (right) faulty
B127F4BSide camera (right), temperature - above limit value
B127F54Side camera (right), calibration
B127FF0Side camera (right), calibration
B13B901Video wire for information electronics 1, Electrical error
B13C629Power sunroof control module, Implausible signal
B13CFF1Pause recommendation, Status feedback for HMI implausible
B15EB12Voltage supply for rear parking aid sensor, Short circuit to B+
B15EB14Voltage supply for rear parking aid sensor, Open circuit/short circuit to ground
B15EC12Voltage supply for front parking aid sensor, Short circuit to B+

All 336 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.