Home › Fault codes › B11F607

B11F607 — Motor for mirror fold-in, mechanical malfunction

Motor for mirror fold-in, mechanical malfunction. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B11F607

Porsche Taycan

Door Module, DriverDoor Module, Passenger

Porsche 911 (992)

Tuer_FS (Tuere vorne Fahrerseite)Tuer_BFS (Tuere vorne Beifahrerseite)

Porsche Panamera (971, 2017–2023)

Door Module, DriverDoor Module, Passenger

Porsche Panamera (972, 2024–)

Tuer_FS (Tuere vorne Fahrerseite)Tuer_BFS (Tuere vorne Beifahrerseite)

Porsche Cayenne (9YA)

Door Module, DriverDoor Module, Passenger

How to read and clear B11F607

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B11F607 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Door Module, Driver

B11EF01Fuel filler door release button, Electrical error
B11EF29Fuel filler door release button, Implausible signal
B11F329Mirror adjustment switch, Implausible signal
B11F411Mirror adjusting motor, Short circuit to ground
B11F412Mirror adjusting motor, Short circuit to B+
B11F601Motor for mirror fold-in, Electrical error
B11F613Motor for mirror fold-in, Open circuit
B11F64BMotor for mirror fold-in, Excess temp.
B11F814Heated outside rear-view mirror, Open circuit/short circuit to ground
B11FA29Position sensor for mirror adjustment, Implausible signal
B11FB11Light for interior door handle illumination, Short circuit to ground
B11FB13Light for interior door handle illumination, Open circuit

All 107 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.