Home › Fault codes › B11DC13
B11DC13 — Pinch protection strip 2, Open circuit
Pinch protection strip 2, Open circuit. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B11DC13
How to read and clear B11DC13
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B11DC13 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Deck Lid Control Unit
| B11DA01 | Rear right lid actuating cylinder - electrical fault |
| B11DA13 | Rear right lid actuating cylinder - open circuit |
| B11DB12 | Anti-pinch protect strip 1 - short circuit to B+ |
| B11DB13 | Pinch protection strip 1, Open circuit |
| B11DB29 | Pinch protection strip 1, Implausible signal |
| B11DC12 | Anti-pinch protect strip 2 - short circuit to B+ |
| B11DC29 | Pinch protection strip 2, Implausible signal |
| B11DD12 | Anti-pinch protect strip 3 - short circuit to B+ |
| B11DD13 | Pinch protection strip 3, Open circuit |
| B11DD29 | Pinch protection strip 3, Implausible signal |
| B11DF11 | Rear buzzer cover - short to ground |
| B11DF12 | Rear buzzer cover - short to B+ |
All 60 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.