Home › Fault codes › B1175F2
B1175F2 — Night vision system camera, Sensor faulty
Night vision system camera, Sensor faulty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B1175F2
How to read and clear B1175F2
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B1175F2 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Night Vision Assist
| B117504 | Night vision system camera, Faulty |
| B117516 | Night vision system camera, Voltage too low |
| B117519 | Night vision system camera, Excess current |
| B117547 | Night vision system camera, Faulty |
| B11754B | Night vision system camera, Excess temp. |
| B1175F0 | Night vision system camera, Function limitation due to insufficient voltage |
| B1175F3 | Night vision system camera, Camera shutter fault |
| B1175F4 | Night vision system camera, Authentication failure |
| B117600 | Night vision system control module |
| B1176F0 | Night vision system control module, Temperature too high |
| B11D401 | Camera heating, Electrical error |
| B11E129 | Video line for night vision system, Implausible signal |
All 38 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.