Home › Fault codes › B116E02
B116E02 — Door handle proximity sensor, rear right – signal error
Door handle proximity sensor, rear right – signal error. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B116E02
How to read and clear B116E02
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B116E02 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Comfort System Module
| B116D02 | Door handle proximity sensor, rear left – signal error |
| B116D11 | Door handle proximity sensor, rear left – short circuit to ground |
| B116D12 | Door handle proximity sensor, rear left – short circuit to B+ |
| B116D13 | Door handle proximity sensor, rear left – open circuit |
| B116D29 | Door handle proximity sensor, rear left – signal implausible |
| B116DF1 | Door handle proximity sensor, rear left – play protection active |
| B116E11 | Door handle proximity sensor, rear right – short circuit to ground |
| B116E12 | Door handle proximity sensor, rear right – short circuit to B+ |
| B116E13 | Door handle proximity sensor, rear right – open circuit |
| B116E29 | Door handle proximity sensor, rear right – signal implausible |
| B116EF1 | Door handle proximity sensor, rear right – play protection active |
| B117211 | Antenna for start authorization on front center console – short circuit to ground |
All 616 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.