Home › Fault codes › B116804
B116804 — Steering-angle sensor faulty
Steering-angle sensor faulty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B116804
How to read and clear B116804
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B116804 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Steering Column Electronics
| B115407 | Switch for ACC - mechanical fault |
| B115411 | CCS Switch, Short circuit to ground |
| B115412 | Switch for ACC - short circuit to B+ |
| B115429 | CCS Switch, Implausible signal |
| B115496 | Switch for ACC - internal fault |
| B115507 | Adaptive cruise control distance selector switch, mechanical malfunction |
| B116807 | Steering-angle sensor - mechanical fault |
| B116829 | Steering-angle sensor - implausible signal |
| B116854 | Steering-angle sensor - no basic setting |
| B145504 | Temperature sensor steering wheel heater, Faulty |
| B150A11 | Headlight flasher switch - short circuit to ground |
| B150B11 | Switch for high beam – short circuit to ground |
All 69 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.