Home › Fault codes › B10F6F2

B10F6F2 — Front left ParkAssist sensor (SFL3) – function restriction due to overtemperature

Front left ParkAssist sensor (SFL3) – function restriction due to overtemperature. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B10F6F2

Porsche Taycan

Front Assist Camera

Porsche 911 (992)

ZFAS (Zentrales Fahrer Assistenz System)

Porsche Panamera (972, 2024–)

ZFAS (Zentrales Fahrer Assistenz System)

Porsche Cayenne (9YA)

ZFAS (Zentrales Fahrer Assistenz System)

How to read and clear B10F6F2

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B10F6F2 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Front Assist Camera

B107EF2Rear right ParkAssist sensor (SRR3) – function restriction due to overtemperature
B10F512Front park assist speaker, Short circuit to B+
B10F514Front park assist speaker, Open circuit/short circuit to ground
B10F612Front left ParkAssist sensor (SFL3) – short circuit to B+
B10F631Front left ParkAssist sensor (SFL3) – no communication
B10F696Front left ParkAssist sensor (SFL3) – internal fault
B10F712Front left ParkAssist sensor (SFL2) – short circuit to B+
B10F731Front left ParkAssist sensor (SFL2) – no communication
B10F796Front left ParkAssist sensor (SFL2) – internal fault
B10F7F2Front left ParkAssist sensor (SFL2) – function restriction due to overtemperature
B10F812Front left ParkAssist sensor (SFL1) – short circuit to B+
B10F831Front left ParkAssist sensor (SFL1) – no communication

All 336 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.