Home › Fault codes › B107E31

B107E31 — Rear right ParkAssist sensor (SRR3) – no communication

Rear right ParkAssist sensor (SRR3) – no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B107E31

Porsche Taycan

Central ElectricsFront Assist Camera

Porsche 911 (992)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

Porsche Panamera (971, 2017–2023)

BCM1 (Body Control Module 1)

Porsche Panamera (972, 2024–)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

Porsche Cayenne (9YA)

BCM1 (Body Control Module 1)ZFAS (Zentrales Fahrer Assistenz System)

How to read and clear B107E31

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B107E31 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Central Electrics

B107D14Rear left ParkAssist sensor (SRL3) – short circuit to ground or open circuit
B107D29Rear left ParkAssist sensor (SRL2) – implausible signal
B107D31Rear left ParkAssist sensor (SRL3) – no communication
B107E12Rear right ParkAssist sensor (SRR3) – short circuit to B+
B107E14Rear right ParkAssist sensor (SRR3) – short circuit to ground or open circuit
B107E29Rear right ParkAssist sensor (SRR2) – signal implausible
B107F11Park assist button, Short circuit to ground
B107F29Park assist button, Implausible signal
B108301Temperature sensor for front left footwell outlet vent - electrical fault
B108401Temperature sensor for front right footwell outlet vent - electrical fault
B108A01Evaporator temperature sensor, Electrical error
B108C04Servo motor for front left temperature mixing flap, faulty

All 1472 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.