Home › Fault codes › B102711
B102711 — Seat occupancy sensor on front passengerʼs side – short circuit to ground
Seat occupancy sensor on front passengerʼs side – short circuit to ground. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B102711
How to read and clear B102711
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B102711 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Airbag
| B102511 | Passenger airbag deactivation switch (L2) - short circuit to ground |
| B102513 | Passenger airbag deactivation switch (L2) - open circuit |
| B102515 | Passenger airbag deactivation switch (L2) - short circuit to B+ or open circuit |
| B102529 | Passenger airbag deactivation switch (L2) - signal implausible |
| B102700 | Sensor for seat occupancy detection on front passengerʼs side – equipment fault |
| B102701 | Occupancy detection sensor, front-passenger seat - electrical fault |
| B102712 | Seat occupancy sensor on front passengerʼs side – short circuit to B+ |
| B102713 | Seat occupancy sensor on front passengerʼs side – open circuit |
| B102729 | Seat occupancy detection sensor on front passengerʼs side - signal implausible |
| B102753 | Seat occupancy detection sensor on front passengerʼs side - deactivated |
| B102800 | Front crash data, stored |
| B102900 | Rear crash data, stored |
All 723 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.