Home › Fault codes › B102013
B102013 — Passenger airbag deactivation switch (L1) - open circuit
Passenger airbag deactivation switch (L1) - open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B102013
How to read and clear B102013
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B102013 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Airbag
| B101F13 | Seat position sensor, front passenger side, Open circuit |
| B101F29 | Passenger-side seat position sensor - signal implausible |
| B102000 | Passenger airbag deactivation switch (L1) - equipment fault |
| B102001 | Passenger airbag deactivation switch (L1) - electrical fault |
| B102004 | Passenger airbag deactivation switch (L1) - faulty |
| B102011 | Passenger airbag deactivation switch (L1) - short circuit to ground |
| B102015 | Passenger airbag deactivation switch (L1) - short circuit to B+ or open circuit |
| B102029 | Passenger airbag deactivation switch (L1) - signal implausible |
| B102053 | Passenger airbag deactivation switch (L1) - deactivated |
| B102200 | Seat occupancy detection control unit - equipment fault |
| B102201 | Seat occupancy detection control unit - electrical fault |
| B102202 | Seat occupancy detection control unit - signal error |
All 723 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.