Home › Fault codes › B10174A
B10174A — Pressure sensor for door on front driverʼs side - wrong sensor installed
Pressure sensor for door on front driverʼs side - wrong sensor installed. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B10174A
How to read and clear B10174A
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B10174A shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Airbag
| B101701 | Pressure sensor for door on front driverʼs side - electrical fault |
| B101704 | Pressure sensor for door on front driverʼs side, faulty |
| B101711 | Pressure sensor for door on front driverʼs side - short circuit to ground |
| B101712 | Pressure sensor for door on front driverʼs side - short circuit to B+ |
| B101713 | Pressure sensor for door on front driverʼs side - open circuit |
| B101729 | Pressure sensor for door on front driverʼs side - signal implausible |
| B101800 | Crash sensor in C-pillar on driver’s side - equipment fault |
| B101801 | Crash sensor in C-pillar on driverʼs side - electrical fault |
| B101804 | Crash sensor in C-pillar on driverʼs side faulty |
| B101811 | Crash sensor in C-pillar on driverʼs side - short circuit to ground |
| B101812 | Crash sensor in C-pillar on driver’s side - short circuit to B+ |
| B101813 | Crash sensor in C-pillar on driver’s side - open circuit |
All 723 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.